Rubber Surfacing · Lubbock, TX
Seamless Rubber Surfacing in Lubbock, TX.
Poured-in-place rubber surfacing built for West Texas. Safe, slip-resistant, and beautiful on playgrounds, sport courts, pool decks, and driveways, finished by a local crew that stands behind the work.
Concrete cracks, asphalt fades, and traditional pool decks turn into a slip hazard the second they get wet. Poured-in-place rubber surfacing solves all of it. Recycled rubber granules bound with a UV-stable polyurethane create a single, seamless surface that's soft underfoot, drains in seconds, and shrugs off the Lubbock sun.
TMB Construction installs rubber surfacing across the South Plains for residential and commercial clients. Backyard playgrounds, neighborhood sport courts, basketball half-courts, pickleball courts, pool decks, patios, splash pads, walkways, and even driveways. One crew preps the substrate, mixes on-site, and trowels the finish to a clean edge.
Available in dozens of color blends with custom inlays, logos, and court line striping. Bonds directly over existing concrete, asphalt, wood, or compacted aggregate, so most projects skip the demolition.
Built for West Texas
Why Seamless Rubber Surfacing Wins in Lubbock
Lubbock is hard on outdoor surfaces. Blistering summers, hard winter freezes, shifting caliche soils, sudden downpours, and constant wind-driven dust. Poured rubber is one of the few finishes that takes all of it and still looks right five years in.
Handles Relentless UV and Heat
Lubbock averages well over 250 sunny days a year. Rubaroc uses EPDM color granules and a UV-stable polyurethane binder, so the surface resists fading and chalking where stamped concrete overlays and painted coatings burn out. Lighter blends also read cooler underfoot than concrete, asphalt, or dark pavers.
Moves With Our Shifting Soils
The caliche and expansive clay under the South Plains push slabs around every wet-dry cycle. A poured rubber surface stays flexible and bridges the hairline cracking that turns a concrete pool deck or patio into a trip hazard within a few seasons.
Survives Freeze-Thaw Winters
West Texas swings from 100-degree afternoons to hard freezes. Water sitting in a concrete crack expands and spalls the slab. Rubber surfacing is permeable and flexible, so freeze-thaw cycles do not chew up the finish the same way.
Drains Fast After Downpours
Our rain arrives all at once. The porous rubber matrix lets water pass through instead of pooling, which means fewer slick spots around pools and splash pads and less standing water on walkways and courts.
Slip Resistance With Bare Feet and Wet Surfaces
The trowelled granule texture grips even when wet. That matters most where people are barefoot: pool decks, splash pads, spa surrounds, and back patios. It is the single biggest safety upgrade over broom-finished concrete.
Shrugs Off Wind-Driven Dust
Blowing dust and grit is a fact of life here. The seamless surface has no joints, no sand-swept paver gaps, and no loose fill to rake out. A hose or a leaf blower resets it, and there is no mulch or pea gravel washing into the yard.
The Material
We Install Rubaroc Rubber Surfacing
Rubaroc is a rubberized safety surfacing system that has been manufactured for more than 40 years and installed on pool decks, play spaces, splash pads, athletic facilities, entrances, and pathways worldwide. It is made of small rubber granules mixed on site with a specially formulated resin, then poured in place and trowelled to follow the shape of the existing substrate.
That on-site mix is the whole point. Nothing is prefabricated, so there are no tile seams to curl, no roll edges to lift, and no control joints to caulk every year. The surface is formed as one continuous piece that wraps steps, radiuses, coping, and irregular pool shapes without a break.
The wear layer uses colorfast EPDM granules, which is what keeps the color from washing out under West Texas UV. The result is a surface that is cushioned enough for a playground, textured enough for a wet pool deck, and clean enough for a front entry walk.
System at a Glance
- System
- Poured-in-place, two-layer rubber and polyurethane
- Wear Layer
- EPDM color granules, colorfast and UV-stable
- Base Layer
- Recycled SBR rubber granules for cushion and depth
- Binder
- Aromatic and aliphatic polyurethane resin, mixed on site
- Finish
- Hand-trowelled seamless, no joints, seams, or tiles
- Bonds To
- Sound concrete, asphalt, wood, pavers, compacted aggregate
- Track Record
- Rubaroc has manufactured rubber surfacing for 40+ years
- Typical Cure
- Usable in roughly 24 to 48 hours, weather dependent
Compare
Rubber Surfacing vs. Concrete, Pavers & Tiles
The honest tradeoffs, side by side, for a Lubbock pool deck, patio, or play area.
| Option | Surface | Safety | Upkeep | Expected Life |
|---|---|---|---|---|
| Poured Rubber Surfacing | Seamless, flexible, textured | Cushioned, slip-resistant wet or dry | Rinse or blow off, spot repairs blend in | 15 to 20+ years |
| Broom-Finished Concrete | Rigid with control joints | Slick when wet, hard on falls | Crack chasing, sealing, patch color never matches | Cracks common in a few seasons here |
| Pavers | Jointed units over a sand bed | Edges lift and create trip points | Re-leveling, re-sanding, weeds in joints | Ongoing maintenance |
| Rubber Tiles or Mats | Interlocking pieces with seams | Good cushion, but seams curl and gap | Debris in seams, individual tiles shift | Seams typically fail first |
| Mulch or Pea Gravel | Loose fill | Displaces from high-traffic zones and thins out | Rake, top off, replace, not ADA accessible | Refill every season |
Expected life assumes a properly prepped substrate and normal residential use. We give you a straight answer on your specific slab during the on-site review.
Applications
Where Rubber Surfacing Makes Sense
Residential
- Pool decks, spa surrounds, and coping edges
- Back patios, porches, and outdoor kitchens
- Backyard playgrounds and swing set zones
- Basketball half-courts and pickleball courts
- Sidewalks, entry paths, and side yards
- Driveway and garage apron resurfacing
- Garage and shop floors that need grip
- Steps and ramps where footing matters
Commercial & Municipal
- Park and school playgrounds with fall-height requirements
- Splash pads and aquatic centers
- HOA and apartment pool decks
- Church and daycare play areas
- Gym, weight room, and locker room flooring
- Building entrances, walkways, and courtyards
- Rooftop decks and patio spaces
- Custom logos, mascots, and wayfinding inlays
Scope of Work
What's Included in a TMB Project
Playground Surfacing
ASTM F1292 fall-rated poured rubber for residential and commercial playgrounds. Cushioned, ADA-accessible, no loose fill to clean up.
Basketball & Pickleball Courts
Backyard sport courts with crisp painted lines for basketball, pickleball, futsal, or multi-sport. Consistent ball bounce, easy on knees and ankles.
Pool Decks & Patios
Cool-to-the-touch, slip-resistant pool decks that won't crack like concrete. Safe for bare feet and tough on chlorine and saltwater.
Driveways & Walkways
Resurface tired concrete driveways, sidewalks, and entry paths in a seamless, durable rubber finish. No more cracked panels or trip hazards.
Custom Colors & Inlays
Dozens of EPDM color blends, custom logos, school mascots, court lines, and decorative patterns trowelled directly into the surface.
Over Existing Surfaces
Bonds directly to sound concrete, asphalt, wood, pavers, or compacted aggregate. Most installs avoid full tear-out and finish in days.
Our Process
How We Get It Done
Submit Form
Tell us about the space, square footage, and what you want to use it for.
On-Site Review
We come to your property in Lubbock to inspect the substrate and measure the area.
Color & Quote
Pick your color blend and any custom inlays. You get a transparent itemized quote.
Pour & Finish
Substrate prep, mix on-site, hand-trowelled to a seamless finish, ready to use within 24 to 48 hours.
Look at Our Work
Real Rubber Surfacing Projects
See the finish, texture, and installation process from one of our recent pool deck projects.
Finished Pool Deck
Seamless Backyard Finish
Prep and Material Staging
Clean Lines and Texture
Hand-Troweled Installation
Work in Progress
Care & Longevity
Maintaining a Rubber Surface
One of the strongest arguments for poured rubber in Lubbock is how little it asks of you after the crew leaves.
- Rinse with a garden hose or sweep with a leaf blower to clear dust and grit.
- For deeper cleaning, use a mild detergent and a soft-bristle push broom.
- Pressure wash on a wide fan tip at moderate pressure, held back from the surface.
- Skip harsh solvents and metal-edged tools that can gouge the wear layer.
- Damage from a dropped grill or heavy impact can be patched in place and blended.
- No annual sealing, joint caulking, or loose-fill top-off is required.
Service Area
Your Local Rubber Surfacing Contractor in Lubbock, TX
TMB Construction installs rubber surfacing across Lubbock and the South Plains, from backyard playgrounds in Frenship and Wolfforth to pool decks in southwest Lubbock and sport courts in Shallowater, Slaton, Idalou, and New Deal. You talk directly with the owner, not a call center.
Hours
Monday to Friday
8:00 AM to 6:00 PM
Also serving Lubbock with kitchen remodeling, bathroom remodeling, whole home remodeling, and Trex deck building.
FAQ